40×40 mm · 472×472 px @ 300 DPI
Government photo-ID applications enforce strict pixel and millimetre specifications because rejection costs the applicant another visit and the issuing office processing time. Argentina Passport Photo is the spec used for the Argentina passport / visa photo standard; if your submitted image misses the dimensions or compression ceiling, the system flags it before a human sees it. This preset crops to square and exports 472×472 JPEG @ 300 DPI, matching the published guideline. Most rejections happen for one of three reasons: wrong physical dimensions, non-white background, or the source resolution was too low to upscale cleanly to 472×472 JPEG @ 300 DPI.
| Output dimensions | 472×472 pixels |
|---|---|
| Aspect ratio | 1:1 (square) |
| Resolution | 300 DPI |
| Output format | JPEG @ 92% quality |
| Processing | 100% in your browser — no upload |
| Cost | Free, unlimited |
| Source | Official guidelines |
The Argentina photo standard is administered by the Registro Nacional de las Personas (RENAPER). South America member states have generally aligned with the 472×472 px specification at 300 DPI, though local rejection criteria vary.
Where this preset's output is accepted: Argentine passport (pasaporte), DNI (national ID), and consular visa applications at Argentine missions abroad.
Travel-document context: Argentine passport holders enjoy visa-free or visa-on-arrival access to 173 destinations, ranking 17th globally — the strongest passport in South America. The photo specifications described on this page apply to the document used for that travel.
Country-specific note: RENAPER requires the photo to show no jewellery (earrings, piercings) — even small studs are grounds for rejection on the digital scan. Run this preset, then verify the result against the official guidelines linked in the specifications table above before submitting.
This preset is a deterministic recipe — every step has fixed parameters so the result is byte-identical across runs of the same input.
Argentina Passport Photo crops your input to 1:1 and resizes it to 472×472 px as JPEG — a 222-kilopixel output. The work runs through canvas APIs and a WebAssembly image-encoder; the source image is decoded into an off-screen canvas, transformed in place, and re-encoded without any network upload.
Government photo-ID portals pre-validate the image dimensions before accepting upload; matching the spec exactly skips the rejection round-trip. The browser-side path also means the file never leaves your device — relevant when the input contains personally identifiable information, screenshots of private documents, ID scans, or proprietary product photography.
472×472 px at 300 DPI, saved as JPEG at quality 92%.
The photo-id this preset targets uses 1:1 framing. For passport photos this matches the printed-photo standard; for social posts it's the safe ratio that fills the feed without horizontal cropping.
300 DPI is the print-grade resolution at which the dot pattern disappears at normal reading distance. Government photo offices, commercial print shops, and biometric scanners all assume 300 DPI; anything lower prints visibly soft.
The target accepts JPEG, and JPEG compresses photographic content 5-10× smaller than PNG with no visible difference at quality 92%. PNG is the right choice only when the image has hard edges or transparency — which photo-ID, social posts, and product photos don't.
No. This preset runs entirely in your browser using WebAssembly + canvas APIs — no server round-trip. You can verify this in your browser's network panel: only static asset requests, no image upload. The file never leaves your device.